Edit History for NETGEAR WGT624 v3 Troubleshooting

	Updating the firmware can fix software glitches. Download the latest version of firmware and then reset the router.

-	== ~~LEDs~~ never turn off ==
+	== LED's never turn off ==

-	Once turned on, the ~~LEDs~~ should all light up for 10 seconds and then turn off. If the ~~LEDs~~ stay turned on, there is something wrong inside the router.
+	Once turned on, the LED's should all light up for 10 seconds and then turn off. If the LED's stay turned on, there is something wrong inside the router.

	=== Cycle the power to see if the router recovers. ===


	A change may have been made to the default settings that has caused the lights to stay on.
+
+	== Unnatural Sounds ==
+
+	My router is making annoying sounds
+
+	=== Buzzing Noise ===
+
+	If you are hearing buzzing sounds coming from the router, it can due to a faulty capacitor. Replacing it can save you from that annoying sounds and can increase the life of the device.
+
+	== Port LED’s do not turn on when Ethernet is plugged in ==
+
+	LED lights should turn on when an Ethernet connection is made.
+
+	=== Check that the connections are secure ===
+
+	The Ethernet must be completely connected before it will work properly.
+
+	=== Make sure that the power is turned on ===
+
+	If the hub or workstation the Ethernet is connected to is not powered on then the LED lights will not turn on.
+
+	=== Make sure you are using the correct cable ===
+
+	When connecting the router’s WAN port to a cable or DSL modem, use the cable that was supplied with the cable or DSL modem.

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.