Revision to Spy Net Ultra Vision Goggles Troubleshooting
| Try switching the mode to either long or short range, since there is a separate set of infrared lights for each mode. If one of the modes works, you can determine which set of lights is working by covering one of them at a time. Disassemble the device, and check the wiring from the infrared lights to the circuit board. If all connections are secure, the infrared lights may need to be replaced. | |
| - | == Screen |
| + | == Screen Blacked Out == |
| - | '' After several minutes of use, the display screen suddenly goes dark. '' |
| + | '' After several minutes of use, the display screen suddenly goes dark, but it still beeps when I toggle through the settings. '' |
| === Faulty Screen === | |
| == Audio Does Not Work == | |
| - | '' |
| + | ''There is no audio when playing back recorded videos. '' |
| === Faulty Microphone === | |
| '' The device displays the 'no memory card' symbol even when the MicroSD card is inserted. " | |
| + | === Contaminated MicroSD Card Reader === |
| + | |
| + | First try turning off the device and taking the card out. Make sure that there is no dust or debris either on the card or in the MicroSD slot. Insert it back into the proper slot, making sure to push it in until it clicks. Turn on the device again and navigate to the playback window. |
| + | |
| === Faulty MicroSD Card === | |
To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.