Revision to Spy Net Ultra Vision Goggles Troubleshooting
| Remove the batteries, and disassemble the device as much as possible. Use a soft rag or paper towel to absorb any visible moisture. Next, use a vacuum to extract as much additional moisture as possible. Let the device set open on an absorbent towel overnight. It may be helpful to place the device in front of a dehumidifier or in a bowl of rice, but be sure to remove all of the rice before reassembling. | |
| - | == |
| + | == Everything is Blurred == |
| - | '' |
| + | '' All of the features work as they are supposed to, but everything is blurry when I look through the goggles. '' |
| - | === |
| + | === Camera Out of Focus === |
| - | Try switching the mode to either long or short range, since there is a separate set of infrared lights for each mode. If one of the modes works, you can determine which set of lights is working by covering one of them at a time. Disassemble the device, and check the wiring from the infrared lights to the circuit board. If all connections are secure, the infrared lights may need to be replaced. Please see the [guide|30587|Infrared Lights Replacement Guide] for instructions on replacing the infrared lights. |
| + | Adjust the focus of the camera by turning the black roller at the front of the device. Try rolling it to the left and to the right until the image is clear. You can also adjust the focus of the screen by turning the black roller at the back of the device. |
| + | |
| + | === Dirty Lens === |
| + | |
| + | === Scratched Lens === |
| == Screen Blacked Out == | |
| === Faulty Screen === | |
| - | Disassemble the device, and check the wiring from the display screen to the circuit board. If all connections are secure, the display screen may need to be replaced. |
| + | Disassemble the device, and check the wiring from the display screen to the circuit board. If all connections are secure, the display screen may need to be replaced. Please see the [guide|30602|Camera & Display Screen Assembly Replacement Guide] for instructions on replacing the display screen. |
| == Audio Does Not Work == | |
| If the microSD card works with a computer or another device, it is most likely a problem with the microSD card reader. Disassemble the device, and check the wiring from the microSD card reader to the circuit board. If all connections are secure, the microSD card reader may need to be replaced. Please see the [guide|30605|MicroSD Card Reader Replacement Guide] for instructions on replacing the microSD card reader. | |
| + | |
| + | == Night Vision Does Not Work == |
| + | |
| + | '' The device works in the daylight, but not at in the dark. '' |
| + | |
| + | === Faulty Infrared Lights === |
| + | |
| + | Try switching the mode to either long or short range, since there is a separate set of infrared lights for each mode. If one of the modes works, you can determine which set of lights is working by covering one of them at a time. Disassemble the device, and check the wiring from the infrared lights to the circuit board. If all connections are secure, the infrared lights may need to be replaced. Please see the [guide|30587|Infrared Lights Replacement Guide] for instructions on replacing the infrared lights. |
To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.