VTech Kidizoom Action Cam Troubleshooting

Your camera is not turning on properly. You are pressing the power button but the device screen remains black or the display screen is not clear.

Ensure that the Master Power switch is set to the "I" position.

The battery must be charged for the device to turn on. To charge the device connect the camera with the Micro-USB cord to the computer or power supply to charge it.

If the home button is stuck the device may not be able to turn on. To fix this you may need to clean or replace the button. Follow to disassembly guide on how to access the home button.

If green light indicator on the top is on and the display is not turning on, the LED display may be faulty. To replace the display on the device follow the LED Display replacement guide.

If all previous solutions do not help, the motherboard may be faulty and needs to be replaced. Follow the motherboard replacement guide for information on how to replace.

Your screen is flickering on and off and the image is distorted

To choose between the two available ratios:

1. Hit the home button

2. Select settings (The wrench and screwdriver icon)

3. Navigate to the Advanced Settings option

4. Navigate to Aspect Ratio

5. Press the left or right buttons to select your desired ratio. Then hit OK to finalize your choice.

Under this setting you can set the A.C. power frequency according to the country you’re in when traveling. If it is not set correctly, flickering on the camera / video’s preview screen can appear. Press the left or right buttons to select an option and press the OK button to confirm.

Ensure that the cable connecting the LED screen and motherboard is properly glued together. Also ensure that the screws holding the casing together are tight.

If the connection between the LED screen and motherboard is secured, the LED screen may be the cause and will have to be replaced. Follow the LED Display replacement guide

If the screen continues to appear distorted or flicker after the LED screen has been replaced, the motherboard may be the cause, and will have to be replaced.

The images are blurry or low quality

Taking photos or videos in areas with insufficient lighting can cause the image to be too dark to see clearly.

Taking photos while moving the camera quickly can cause the picture to appear blurry, as the VTech Kidizoom Actioncam's 0.3 MP camera does not have the ability to take videos clearly while moving horizontally at a fast speed.

Gently use a Q-tip dipped in rubbing alcohol to clear away debris and smudging on the camera lens. If significant scratching is revealed, you will need to replace the camera lens. Refer to our Camera Replacement Guide if this is the case.

Ensure that the cable connecting the camera and the motherboard is properly connected. Compare your camera cable to the one in our Camera Replacement Guide to determine if this needs to be replaced.

In the case that the camera is properly connected to the motherboard, the motherboard may be the cause and will have to be replaced.

You cannot connect the device to the computer. The computer does not recognize that the device is connected to the computer.

If the camera is powered off the device will not be able to connect to the computer. Turn the device on before connecting it to the computer.

Some micro-USB cables are charge only, and do not have the ability to move pictures to and from a computer. If available, use the connection cable included in the packaging. In the case that the cable is not available, use a micro-usb cable capable of transferring data.

If the connection cable is faulty, the device may not be able to connect to the computer. In this case, replace the cable.

If the micro-USB port is dirty, the connection cable may not be able to properly connect to the computer. Remove any dust or residue covering the port.

If the USB port of the computer is dirty, the connection cable may not be able to properly connect to your VTech Kidizoom Action Cam. Remove any dust or residue covering the port.

Look at the motherboard replacement guide to see how to replace the usb port in the camera.

If the USB port on the computer is faulty, the device will not be able to connect to the computer.

If the micro-USB port on the device is faulty, then the device will not be able to connect to the computer. In this case, the motherboard will have to be replaced.

You cannot locate the folder containing your pictures and videos on your computer.

Make sure Micro-SD card is in on your device. In case it is not in there or has not been placed, this may be the reason why your picture or videos won't upload. Simply put it back into the device.

You might need to use an air duster to get some dirt out and try it again. If it’s not working, you might need to use wipes to clean it up.

Under "My Computer" on your computer, locate the VTech Kidizoom Action Cam. If the DCIM folder is not present, follow these steps:

1. Click Organize

2. Click Folder and Search Options

3. Click View

4. Click Show hidden files

5. Click Apply

Your DCIM folder should now be visible.

If available, put the Micro-SD card into another device and see if it works. If it doesn't, the Micro-SD card is faulty and needs to be replaced.

The battery is not charging, or will not retain charge.

Ensure that you have the micro-USB cable included with the VTech Kidizoom Actioncam plugged into the micro-USB port of the Actioncam, and that the USB side of the cable is plugged into a USB port on a computer, or a USB to electrical socket adapter or "wall charger

Check that the master power switch (The (I|O) switch located on the bottom of the camera) is switched to the "I" position. Otherwise, it will not charge.

Carefully use a toothpick lightly dipped in rubbing alcohol to dislodge any dirt or dust located inside the micro-USB port.

If cleaning the inside of the micro-USB port is unsuccessful, the micro-USB cable may be faulty.

If replacing the micro-USB cable is unsuccessful, the micro-USB port itself may be malfunctioning and needs to be replaced.

If all steps above have proven unsuccessful, the battery may be faulty.

Your buttons stick when you press them down, or do not work at all.

Remove the buttons from the casing and use a Q-Tip or tooth pick dipped in rubbing alcohol to remove debris from the buttons. Follow the Buttons replacement guide

If the plastic connection in between the buttons and the motherboard is damaged, the buttons will not reach the button located on the motherboard. Replacing the motherboard should resolve this problem.