LG Dishwasher - new drain issue. Advice needed please.
Text:
I'm sorry if this sort of issues has been done to death, but I can't find ant suggestions that relate to my specific problem. My LD1452 dishwasher displayed the OE error, and so I've checked all the drain hoses and internals for blockages etc. I've also fitted a new pump but the issue still remains. I'm doubting the old pump was faulty.
When the cycle starts there's a 3 second whirl of the new pump and then it fills with wash water and goes through the wash cycle, but won't pump the wash water out before it goes into the rinse cycle. At the end of the rinse cycle the dishwasher quits and displays the OE code.
By pressing three buttons on the door panel I can get the pump to pump out, although not consistently, and I can get a new cycle to start again, but with the same issues.
Could the circuit board be faulty?
Also, I've read confusing statements about the water level sensor that seems to be called a "turbidity" sensor. Can someone please clarify.
Finally, if the water level sensor/turbidity sensor is faulty could the drain pump be getting a signal that it's not needed??
Any help would be appreciated.
Thanks,