After screen replacement, there is no response.
I just replaced my screen (only went as far as connecting the new screens flex cable connector) and the power button does not do anything. I then reconnected the old screen and the again, power button does nothing.
I was very careful, and don’t think anything went wrong during the repair, but wonder if there might either be a problem with the battery (I couldn’t turn the phone off after the screen shattered, so it would have run down then sat dead for around 5 days) or if I possibly could have bent some of the flex cable connector pins.
After charging overnight, I still have the same situation. Thoughts?
Thanks!
Is this a good question?