Fisher Price Bongo set - has joint for changing position of bongos. 3 new batteries have been installed and we checked the wiring in both bongos and nothing seems to be loose. A slight whrrrr then no sound or light.
Is this a good question?
Rep: 2.5k
5
2
13
You could check the the battery terminals, make sure they aren’t corroded, if they are clean them. As for the slight whrrrr noise, this toy doesn’t have a motor only a speaker and lights. Now I think the whrrrr noise is from the speaker, it may sound like a low humming/static, meaning that the speaker could be burnt out, and needs replacing. Since you’ve checked both all the wiring making sure its not loose or has any slices in the wires it could be the joint switch not working right/making a connection to the circuit board for the toy to start up, check around there. You need to find out where the whrrrr noise is coming from, It could lead you to the problem and the solution.
I’m assuming you have this set: https://youtu.be/AskQ8nvYEHc
Was this answer helpful?
This is new no corrosion or damage I can see
Yes I have the set
I have a fisher price drill a few months old not used much now that novelty is worn out and i tried to change the batteries it was stop & go
It still isn’t running
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 6
Past 30 Days: 17
All Time: 1,206
