Charging port not working
My omni10 HP charging port has spoil… How can I get the pot so that I can Change it please
Is this a good question?
Score
0
697743
1 Answer
Chosen Solution
Rep: 812.6k
1.2k
920
2.4k
Olabode olawale the port is soldered to the motherboard. So you will have to remove the board. Follow something like this guide HP Omni 10 Battery Replacement to at least get to the motherboard. There are not a lot of guides out there yet. Once you have the board out, you will need to un-solder the old port and replace it with something like this
Was this answer helpful?
Score
1
