Fix Your Stuff Community Store

Repair guides and support for top and front loading Whirlpool brand washers.

431 Questions View all

Options

Whirlpool Cabrio WTW8500DC5 giving multiple error codes

My Whirlpool Cabrio top load washer is giving multiple error codes. The first was LF. I changed the water inlet valve and it fixed it for 2 days. Then it started showing F8E1 and F0E3. After replacing the water inlet valve, it was going thru a cycle and started making an electrical “buzzing” like something was straining or stuck. Then started flashing F8E3. Any suggestions? Does this sound like a control board problem?

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

Hi @chadmeuir

Here's the tech sheet for the washer that may help.

Go to p.10 to view what to check when an F8 E1 and F8 E3 error occurs.

If there's a faulty part that needs replacing, here's the part list that is useful.

When you have located the wanted part in the list, you'll find that the manufacturer's part number is listed with it. Search online for the part number only, to find suppliers that suit you best.

Was this answer helpful?

Yes No
Score 1
Add a comment

Add your answer

Chad Meuir will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 24

All Time: 24