Planetary Gear
|
4 Answers 5 Score |
Chuck is stuck and will not turn |
|
1 Answer 2 Score |
Battery no longer holds a charge |
|
3 Answers 1 Score |
Bit won't come out of the chuck. |
Tools
These are some common tools used to work on this device. You might not need every tool for every procedure.
Background
The RIDGID R84015 X2 is an 18 volt, 1/2 inch chuck cordless drill with 2 separate gear speeds and 24 clutch settings. The required battery voltage is also imprinted in the plastic at the base of the handle on both sides of the drill. For a list of cordless drills and other products made by RIDGID, visit RIDGID's website
Identification
The model number is listed along with chuck size, required battery voltage, serial number, and a few other specifications on a small sticker on the left side of the drill (looking from front to back).
Parts
Visit RIDGID's R84015 X2 parts list for an exploded view of the drill, showing all parts with their respective part numbers.
Additional Information
For more information about this drill and warranty information, visit RIDGID's website and the owner's manual for the R84015 X2 (if a PDF does not open, then right click on the link and save the PDF to your computer by selecting "Save Link As...")
Team
Cal Poly, Team 15-48, Garner Spring 2010 Member of Cal Poly, Team 15-48, Garner Spring 2010
CPSU-GARNER-S10S15G48
6 Members
10 Guides authored
