Fix Your Stuff Community Store

Intro History: Flash Motherboard

Edit by Jakub —

Pending approval

Before
After
Unchanged
Device
Canon PowerShot A550
Type
disassembly
Thing
Flash Logic Board
Title
Removing A Flash Logic Board
Introduction
If your flash settings are set correctly but your camera does not flash, you will need to replace the flash logic board. First, you will need to use [guide|5665|this guide]to remove the front and back covers. Once that is complete, you may move on to the next step.
Time Required Min
No estimate
Time Required Max
No estimate
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Jakub
Public
No

Flags

  • In Progress added.
  • Community-Contributed Guide added.
  • Student In Progress added.