Changes to Step #5
Edit by Jose Olarte III —
Edit approved by Jose Olarte III
- Before
- After
- Unchanged
Step Lines
| [title] Lift the Analog Board | |
| [* black] Lift the analog board assembly by holding onto the edges of the board. | |
| - | [* black] You may need to guide the analog sticks |
| + | [* black] You may need to guide the analog sticks to clear the holes in the front panel while lifting the assembly. |
| [* icon_caution] Be careful not to pull on the ribbon! | |
| [* black] Flip the board over so that the analog sticks are now facing upwards. Set it above the controller. |