Skip to main content
Help

Canon EOS 70D LCD Touchscreen Replacement

Editing Step 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Pull Touchscreen out and rotate 90 degrees. Remove the four 3 mm Phillips #000 head screws that are now exposed at the hinge.

Remove the two 5 mm Phillips #000 head screws that near the viewfinder.

Use a spudger and pry apart the two plastic columns surrounding the screen hinge.

The screen will not be removed at this step.

Rotate the screen forward 90 degrees and push it back into its housing against the camera.

Your contributions are licensed under the open source Creative Commons license.