Fix Your Stuff Community Store
Help

Karcher Pressure Washers 15209900 Pump Removal

Editing Step 2 —
Loosen the pump assembly

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Use a 13mm socket to remove the four long bolts holding the pump assembly to the motor.

Re-assembly tip: The bolts hold the pump under pressure against the motor assembly. During reassembly, gradually tighten the bolts in a cross pattern.

Your contributions are licensed under the open source Creative Commons license.