Remove the display assembly.

You will have to thread the replacement assembly's display cable through the motherboard cutout.

If you're having trouble, you can unclip the white antenna cable running through the same cutout or you can loosen and partially remove the motherboard.

If you're using a custom-cut adhesive, follow this guide for instructions on how to apply adhesive to the replacement display assembly.

Be sure to test your repairs before you affix the display assembly with adhesives.

If you are using Tesa tape to reattach the display assembly, follow this guide.

During the boot-up process after reassembly, the display assembly will go through a calibration sequence. Do not touch the assembly during this process, as it could result in improper touch calibration and create touch issues.