Barreto Tillers E1320HTRLR 2016 Tine Shaft Replacement

Editing Step 4 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Drag to rearrange

Use a 5/8 inch socket with an 11/16 inch wrench to remove the two 5/8 inch bolts and two 11/16 inch nuts behind each removed tine.

Repeat this for each of the four tine locations; there are a total of eight bolts to remove.

Your contributions are licensed under the open source Creative Commons license.

Guide Step Edit Keyboard Shortcuts: