Skip to main content
Help

iPhone 7 Plus Lightning Connector Assembly Replacement

1 hour - 2 hours

  • iPhone 7 Plus Pentalobe Screws Replacement
  • Mark your Opening Picks at 3 mm
  • iPhone 8 Opening Procedure
  • iPhone 7 Plus Battery Disconnection
  • iPhone 7 Plus Display Assembly Replacement
  • iPhone 7 Plus Top Left Antenna Replacement
  • iPhone 7 Plus SIM Card Replacement
  • iPhone 7 Plus Logic Board Replacement
  • iPhone 7 Plus Barometric Vent Replacement
  • 1 × Clampy - Anti-Clamp
  • 1 × P2 Pentalobe Screwdriver iPhone
  • 1 × iOpener
  • 1 × Suction Handle
  • 1 × iFixit Opening Picks (Set of 6)
  • 1 × Spudger
  • 1 × Tri-point Y000 Screwdriver
  • 1 × Tweezers
  • 1 × Phillips #000 Screwdriver
  • 1 × SIM Card Eject Tool
  • 1 × iFixit Opening Tool
  • 1 × Standoff Screwdriver for iPhones

Prerequisite guides use 7 parts that are not on this guide.

Import missing parts (will sum quantities)

  • 1 × iPhone 7 Plus Lightning Connector Assembly
  • 1 × iPhone 7 Plus Lightning Connector Cable Conductive Adhesive
  • 1 × iPhone 7 Plus Speaker and Microphone Mesh Set
  • 1 × iPhone 7 Plus Display Assembly Adhesive
  • 1 × iPhone 7 7 Plus Lightning Connector Grounding Spring Contact
Add New

Your contributions are licensed under the open source Creative Commons license.