Fix Your Stuff Community Store

Reemplazo de la placa de E/S del MacBook Air de 13" mediados de 2012

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Back to Guide
English
Spanish
Previous step Next step

Translating step 2

Step 2
MacBook Air 13" Mid 2012 I/O Board Replacement: step 0, image 1 of 1

  • Pull the camera cable parallel to the face of the I/O board toward the hinge of the Air to disconnect it from its socket, using the tip of a spudger to help push the connector out of its socket.

  • Do not lift upward on this cable as you disconnect it, as its socket may break off the logic board.

Tira del cable de la cámara paralelo a la cara de la placa de E/S hacia la bisagra del Air para desconectarlo de su zócalo, usando la punta de un spudger para ayudar a empujar el conector fuera de su zócalo.

No levantes este cable hacia arriba mientras lo desconectas, ya que su enchufe puede romper la placa lógica.

Your contributions are licensed under the open source Creative Commons license.