Fix Your Stuff Community Store

Reemplazo de la placa de E/S del MacBook Air de 13" mediados de 2012

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Back to Guide
English
Spanish
Previous step Next step

Translating step 4

Step 4
MacBook Air 13" Mid 2012 I/O Board Replacement: step 0, image 1 of 2 MacBook Air 13" Mid 2012 I/O Board Replacement: step 0, image 2 of 2

  • Use the tip of a spudger to flip up the retaining flap securing the microphone ribbon cable to the I/O board.

  • Use the tip of a spudger to remove the volume button ribbon cable from its ZIF connector on the I/O board.

Utiliza la punta de un spudger para levantar la solapa de retención que fija el cable plano del micrófono a la placa de E/S.

Utiliza la punta de un spudger para quitar el cable plano del botón de volumen de su conector ZIF en la placa de E/S.

Your contributions are licensed under the open source Creative Commons license.