Fix Your Stuff Community Store

更换任天堂Switch背部外壳

Notice: You are editing a prerequisite guide. Any changes you make will affect all 22 guides that include this step.

Back to Guide
English
Chinese
Previous step Next step

Translating step 3

Step 3
Nintendo Switch Rear Panel Replacement, Remove the back-side screws: step 0, image 1 of 1
Remove the back-side screws

  • Use a Y00 screwdriver to remove the four 6.3 mm-long screws securing the rear panel.

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from.

移除背盖螺丝

使用 Y00 螺丝刀拧下固定在后盖上的 4 颗 6.3 毫米螺丝。

在整个维修过程中，请妥善保管每一颗螺丝 ，并保证在装回时每颗螺丝都能安装至原来的位置。

Your contributions are licensed under the open source Creative Commons license.