Fix Your Stuff Community Store

iPod Nano 4th Generation Click Wheel Replacement

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Back to Guide
English
Chinese

Translating step 1

Step 1
iPod Nano 4th Generation Click Wheel Replacement: step 0, image 1 of 2 iPod Nano 4th Generation Click Wheel Replacement: step 0, image 2 of 2

  • Press down firmly around the perimeter of the click wheel to separate it from the adhesive securing it to the outer case.

  • This requires a good amount of force. Work slowly.

  • It may be helpful to use an edged tool to separate the adhesive from the click wheel on the inside of the Nano while pressing it down from the outside.

  • Remove the click wheel from the inside of the Nano.

  • Be careful not to let the click-wheel slide on the metal plate supporting it, as it will break the flat cable. Apply force perpendicular to the click-wheel.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.