Fix Your Stuff Community Store

How to Fix the C6 Error for a Pressure Cooker

Back to Guide
English
Korean
Previous step Next step

Translating step 4

Step 4
How to Fix the C6 Error for a Pressure Cooker, Diagnose the C6 or C6H error: step 0, image 1 of 2 How to Fix the C6 Error for a Pressure Cooker, Diagnose the C6 or C6H error: step 0, image 2 of 2
Diagnose the C6 or C6H error

  • The next three steps show how to test the high pressure sensor more extensively. You should check this sensor if you get a C6 or C6H error.

  • If you don't have a "duo" pressure cooker, you will only have one pressure sensor, and it's this high pressure one.

  • Make sure the pressure cooker is unplugged from the outlet.

  • Use pliers or your fingers to lift and disconnect one of the sensor's spade connectors from the circuit board.

  • These connectors can be stubborn. Gently wiggle the connector as you pull to loosen it.

  • This disconnects the sensor electrically, so we can do a continuity test.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.