Fix Your Stuff Community Store

How to Fix the C6 Error for a Pressure Cooker

Back to Guide
English
Korean
Previous step Next step

Translating step 6

Step 6

  • In its resting state, the pressure sensor should be continuous, which means the meter should read almost zero resistance.

  • If the meter shows a high resistance or no continuity, it could mean that the sensor contacts are dirty. Double-check your meter contacts and make sure they're grasping onto the wires.

  • Use a spudger or your finger to firmly press on the top of the sensor until it clicks.

  • The meter should change to show no continuity (0.L, in my meter's case). If it doesn't, there is a potential electrical short—the contacts may be fused, or you may need to replace the sensor.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.