Skip to main content

Cómo abrir el iPhone SE 2022 para reparaciones

Notice: You are editing a prerequisite guide. Any changes you make will affect all 13 guides that include this step.

English
Spanish

Translating step 8

Step 8
How to open the iPhone SE 2022 for repairs, Slice the adhesive: step 0, image 1 of 3 How to open the iPhone SE 2022 for repairs, Slice the adhesive: step 0, image 2 of 3 How to open the iPhone SE 2022 for repairs, Slice the adhesive: step 0, image 3 of 3
Slice the adhesive
  • If the adhesive becomes hard to cut, it has most likely cooled down. Use your iOpener for two to three minutes to reheat it.

  • Slide the bottom left opening pick along the left edge of your phone to slice the adhesive.

  • Stop near the top left corner of the display.

  • Do not try to pry the top edge of the display away from the rear case, as it is held in place by plastic clips that may break.

Si el adhesivo se vuelve difícil de cortar, lo más probable es que se haya enfriado. Utiliza tu iOpener durante dos o tres minutos para recalentarlo.

Desliza la púa de apertura inferior izquierdo a lo largo del borde izquierdo de tu teléfono para cortar el adhesivo.

Detente cerca de la esquina superior izquierda de la pantalla.

No intentes hacer palanca para separar el borde superior de la pantalla de la carcasa trasera, ya que está sujeta por clips de plástico que pueden romperse.

Your contributions are licensed under the open source Creative Commons license.