Fix Your Stuff Community Store

Opening Procedure (1st and 2nd Gen)

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Back to Guide
English
Dutch
Previous step Next step

Translating step 7

Step 7
Opening Procedure (1st and 2nd Gen), Separate the right edge adhesive: step 0, image 1 of 3 Opening Procedure (1st and 2nd Gen), Separate the right edge adhesive: step 0, image 2 of 3 Opening Procedure (1st and 2nd Gen), Separate the right edge adhesive: step 0, image 3 of 3
Separate the right edge adhesive

  • Insert a new opening pick in the gap you just created.

  • Slide the pick along the right edge to separate the adhesive.

  • When sliding near the volume buttons, don't insert the pick more than 2 mm or you'll damage the screen magnets.

  • Leave the pick in the top right corner to prevent the adhesive from re-sealing.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.