Fix Your Stuff Community Store

Extracción de la placa madre

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Back to Guide
English
Spanish
Next step

Translating step 1

Step 1
Main Board Removal, Remove the main board screws: step 0, image 1 of 2 Main Board Removal, Remove the main board screws: step 0, image 2 of 2
Remove the main board screws

  • Use a Phillips screwdriver to remove the 11 mm‑long SSD screw.

  • Be careful not to lose the small spacer under the screw.

  • Use a Phillips screwdriver to remove the two 11.8 mm‑long APU tension bracket screws.

  • Don't remove or install one screw at a time, or you may damage the APU. During disassembly and reassembly, alternate between the two screws a 1/2 turn at a time to maintain even pressure on the bracket.

  • Use a TR8 Torx security screwdriver to remove the two remaining 7.3 mm‑long main board screws.

Quita los tornillos de la placa principal

Utiliza un destornillador Phillips para quitar el tornillo SSD de 11 mm de largo.

Ten cuidado de no perder el pequeño espaciador debajo del tornillo.

Utiliza un destornillador Phillips para quitar los dos tornillos del soporte de la APU de 11,8 mm de largo.

Utiliza un destornillador de seguridad TR8 Torx para quitar los dos tornillos restantes de la placa principal de 7,3 mm de largo.

[title] Remove the main board screws
[* red] Use a Phillips screwdriver to remove the 11 mm‑long SSD screw.
[* icon_note] Be careful not to lose the small spacer under the screw.
-[* yellow] Use a Phillips screwdriver to remove the two 11.8 mm‑long APU bracket screws.
+[* yellow] Use a Phillips screwdriver to remove the two 11.8 mm‑long APU tension bracket screws.
+ [* icon_note] ***Don't remove or install one screw at a time***, or you may damage the APU. During disassembly and reassembly, alternate between the two screws a 1/2 turn at a time to maintain even pressure on the bracket.
[* light_blue] Use a TR8 Torx security screwdriver to remove the two remaining 7.3 mm‑long main board screws.

Your contributions are licensed under the open source Creative Commons license.