Fix Your Stuff Community Store

Extracción de la placa madre

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Back to Guide
English
Spanish
Previous step Next step

Translating step 2

Step 2
Main Board Removal: step 0, image 1 of 3 Main Board Removal: step 0, image 2 of 3 Main Board Removal: step 0, image 3 of 3

  • Lift and remove both APU brackets from the board.

  • During reassembly:

  • Put the bracket with plastic arms on first so the pegs go into their cutouts.

  • Then, put the metal bracket onto the plastic one so they're perpendicular and the screw holes line up.

Levanta y quita ambos soportes de APU de la placa.

Durante el reensamblaje:

Coloca primero el soporte con brazos de plástico para que las clavijas entren en sus recortes.

Luego, coloca el soporte de metal sobre el de plástico de modo que queden perpendiculares y los orificios de los tornillos estén alineados.

Your contributions are licensed under the open source Creative Commons license.