How can I mend holes or tears on my backpack?

Step 1

Measure the size of the hole or tear: Measure the length and width of the hole or tear. Make sure to note down the dimensions.

Step 2

Create a template for the patch: Two templates will be made: one for the inner patch and one for the outer patch.

Step 3

Roughly cut out the drawn patch shapes. The fabric piece shown here is cut into a rectangle.

Step 4

Ironing Step 1: Place the double-sided fabric adhesive with the film side facing the left side of the fabric and iron it on. Follow the manufacturer’s instructions for applying the adhesive. Let it cool.

Step 5

Cut out the patch along the drawn lines.

Step 6

Remove the silicone paper from the cut patch before placing it over the hole or tear in your backpack and ironing it on (see Step 7). Start with the inner patch.

Step 7

Ironing Step 2 for the inner patch:

Step 8

Ironing Step 2 for the outer patch:

Step 9

For better hold, the patch can also be sewn around the edges. This should be done from the right side / outside.

Step 10

Result.