Fix Your Stuff Community Store

Reemplazo de la caja metálica superior de Xbox One

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Back to Guide
English
Spanish
Previous step Next step

Translating step 2

Step 2
Xbox One Upper Metal Case Replacement: step 0, image 1 of 3 Xbox One Upper Metal Case Replacement: step 0, image 2 of 3 Xbox One Upper Metal Case Replacement: step 0, image 3 of 3

  • Remove the two 9.5 mm T8 Torx screws from the WI-Fi board.

  • Lift the Wi-Fi board straight up from its socket in the upper metal case.

  • Leaving the Wi-Fi board antenna cable in place, move the Wi-Fi board aside, exposing the screw labeled "C3" that was beneath it.

Retire los dos tornillos Torx T8 de 9.5 mm de la placa WI-Fi.

Levante la placa de Wi-Fi directamente desde su zócalo en la carcasa de metal superior.

Deje el cable de la antena de la placa Wi-Fi en su lugar, mueva la placa de Wi-Fi a un lado, exponiendo el tornillo con la etiqueta "C3" que estaba debajo.

Your contributions are licensed under the open source Creative Commons license.