Fix Your Stuff Community Store

Sostituzione scocca superiore in metallo Xbox One

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Back to Guide
English
Italian
Previous step Next step

Translating step 2

Step 2
Xbox One Upper Metal Case Replacement: step 0, image 1 of 3 Xbox One Upper Metal Case Replacement: step 0, image 2 of 3 Xbox One Upper Metal Case Replacement: step 0, image 3 of 3

  • Remove the two 9.5 mm T8 Torx screws from the WI-Fi board.

  • Lift the Wi-Fi board straight up from its socket in the upper metal case.

  • Leaving the Wi-Fi board antenna cable in place, move the Wi-Fi board aside, exposing the screw labeled "C3" that was beneath it.

Rimuovi le due viti Torx T8 da 9,5 mm dalla scheda Wi-Fi.

Solleva il modulo Wi-Fi dal suo alloggiamento nella parte superiore della scocca metallica.

Lasciando dov'è l'antenna della scheda Wi-Fi, sposta leggermente la scheda, fino a scoprire la vite etichettata come "C3" che si trova al di sotto di essa.

Your contributions are licensed under the open source Creative Commons license.