Skip to main content

Remplacement du boîtier de l'appareil photo Canon Powershot A610

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
French

Translating step 3

Step 3
Canon Powershot A610 Camera Housing Replacement: step 0, image 1 of 1
  • Open the battery cover.

  • Remove the 5 mm screw that sits on the top of the battery slot.

  • Remove the three 6 mm screws that sit at the bottom of the battery slot.

  • Close the battery cover.

Ouvrez le couvercle de la batterie.

Retirez la vis de 5 mm qui se trouve sur le dessus du logement de la batterie.

Retirez les trois vis de 6 mm qui se trouvent au bas du logement de la batterie.

Fermez le couvercle de la batterie.

[* black] Open the battery cover.
-[* yellow] Remove the 5 mm screw that sits on the top of the battery slot.
-[* red] Remove the three 6 mm screws that sit at the bottom of the battery slot.
+[* red] Remove the 5 mm screw that sits on the top of the battery slot.
+[* orange] Remove the three 6 mm screws that sit at the bottom of the battery slot.
[* black] Close the battery cover.

Your contributions are licensed under the open source Creative Commons license.