Fix Your Stuff Community Store

MacBook Pro 13" Unibody Mediados 2011Remplazo de la Tarjeta Lógica

Notice: You are editing a prerequisite guide. Any changes you make will affect all 19 guides that include this step.

Back to Guide
English
Spanish
Next step

Translating step 1

Step 1
MacBook Pro 13" Unibody Early 2011 Logic Board Replacement: step 0, image 1 of 2 MacBook Pro 13" Unibody Early 2011 Logic Board Replacement: step 0, image 2 of 2

  • Use the tip of a spudger to pull the right speaker/subwoofer cable out from under the retaining finger molded into the upper case.

  • Pull the right speaker/subwoofer cable upward to lift the connector out of its socket on the logic board.

Utiliza la punta de un spudger para sacar el cable del altavoz/subwoofer derecho por debajo del dedo de retención moldeado en la caja superior.

Jala el cable del altavoz/subwoofer derecho hacia arriba para sacar el conector de su enchufe en la placa lógica.

Your contributions are licensed under the open source Creative Commons license.