Fix Your Stuff Community Store

MacBook Pro 13" Unibody Mediados 2011Remplazo de la Tarjeta Lógica

Notice: You are editing a prerequisite guide. Any changes you make will affect all 19 guides that include this step.

Back to Guide
English
Spanish
Previous step Next step

Translating step 2

Step 2
MacBook Pro 13" Unibody Early 2011 Logic Board Replacement: step 0, image 1 of 1

  • Disconnect the camera cable from the logic board.

  • The camera cable slides out from its logic board connector. If your cable feels fragile, use a spudger to walk the cable out from the metal tabs on each side of the connector head.

Desconecta el cable de la cámara de la placa lógica.

Tira del cable paralelo a la cara de la placa lógica. Jalar el cable hacia arriba puede dañar la placa lógica o el cable mismo.

[* black] Disconnect the camera cable from the logic board.
-[* icon_caution] Pull the cable parallel to the face of the logic board. Pulling the cable upward may damage the logic board or the cable itself.
+ [* icon_note] The camera cable slides out from its logic board connector. If your cable feels fragile, use a spudger to walk the cable out from the metal tabs on each side of the connector head.

Your contributions are licensed under the open source Creative Commons license.