Fix Your Stuff Community Store

iPad 2 Wi-Fi EMC 2415 Front Panel Einheit ersetzen

Notice: You are editing a prerequisite guide. Any changes you make will affect all 39 guides that include this step.

Back to Guide
English
German
Next step

Translating step 1

Step 1
iPad 2 Wi-Fi EMC 2415 Front Panel Assembly Replacement: step 0, image 1 of 2 iPad 2 Wi-Fi EMC 2415 Front Panel Assembly Replacement: step 0, image 2 of 2

  • Use the edge of a plastic opening tool to carefully flip up the retaining flaps on the two digitizer ribbon cable ZIF sockets.

  • Be sure you are prying up on the hinged retaining flaps, not the sockets themselves.

  • The retaining flaps are highlighted in red in the second picture.

Klappe die Haltebügel an den beiden ZIF-Sockeln der Digitizer Flachbandkabel vorsichtig mit einem Plastic Opening Tool um.

Achte darauf, dass du an den klappbaren Haltebügeln hebelst und nicht an den Sockeln selbst.

Die Haltebügel sind rot im zweiten Bild hervorgehoben.

Your contributions are licensed under the open source Creative Commons license.