Fix Your Stuff Community Store

iPad 2 Wi-Fi EMC 2415 Front Panel Einheit ersetzen

Notice: You are editing a prerequisite guide. Any changes you make will affect all 39 guides that include this step.

Back to Guide
English
German
Previous step Next step

Translating step 2

Step 2
iPad 2 Wi-Fi EMC 2415 Front Panel Assembly Replacement: step 0, image 1 of 2 iPad 2 Wi-Fi EMC 2415 Front Panel Assembly Replacement: step 0, image 2 of 2

  • Use the edge of a plastic opening tool to peel the digitizer cable off the shields on the logic board.

  • Carefully pull the digitizer cable off the adhesive securing it to the side of the rear case.

Benutze die Kante eines Plastic Opening Tools um das Digitizer Kabel von der Abschirmung auf dem Logic Board zu lösen.

Ziehe das Digitizer vorsichtig vom Kleber ab, mit dem es an der Seite des hinteren Gehäuses festgemacht ist.

Your contributions are licensed under the open source Creative Commons license.