Fix Your Stuff Community Store

GoPro Hero4 Black Midframe Housing Replacement

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

Back to Guide
English
Spanish
Previous step

Translating step 4

Step 4
GoPro Hero4 Black Midframe Housing Replacement: step 0, image 1 of 3 GoPro Hero4 Black Midframe Housing Replacement: step 0, image 2 of 3 GoPro Hero4 Black Midframe Housing Replacement: step 0, image 3 of 3

  • Using tweezers, remove the ribbon strip by pulling on it. This will remove the connection.

  • Push down on the three wires with the metal spudger and the clip will disconnect from the motherboard.

  • The clip must be pulled up and away from the motherboard. Attempting to slide it out will damage the clip.

  • During reassembly, remove the black tape on the ribbon cable, turn the camera upside down so you can see the port, and reinsert the cable with tweezers. It's a lot easier!

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.