View:
Passed VotesAnyone with over 20 reputation can flag problematic comments and posts.
Show details
Rep: 23
Posted:
Can you help me to identify the Capacitor in the image. I need to buy a new one. Thank you very much
Dear all, after a long wait for the delivery I think the capacitor it too small.
I checked the diagram: it might be this one???
Rep: 785.5k
Posted:
@luigicapaldi looks like 0402 is definitely to small. Back to the order line. Now, just measure the length and the width of the capacitor you want to replace. Then check for the package size based on those measurements:
Package | mm | inch
2512 | 6.3 x 3.2 | 0.25 x 0.125
2010 | 5.0 x 2.5 | 0.20 x 0.10
1825 | 4.5 x 6.4 | 0.18 x 0.25
1812 | 4.6 x 3.0 | 0.18 x 0.125
1806 | 4.5 x 1.6 | 0.18 x 0.06
1210 | 3.2 x 2.5 | 0.125 x 0.10
1206 | 3.0 x 1.5 | 0.12 x 0.06
1008 | 2.5 x 2.0 | 0.10 x 0.08
0805 | 2.0 x 1.3 | 0.08 x 0.05
0603 | 1.5 x 0.8 | 0.06 x 0.03
Show details
Rep: 785.5k
Posted:
@luigicapaldi looks like 0402 is definitely to small. Back to the order line. Now, just measure the length and the width of the capacitor you want to replace. Then check for the package size based on those measurements:
Package | mm | inch
2512 | 6.3 x 3.2 | 0.25 x 0.125
2010 | 5.0 x 2.5 | 0.20 x 0.10
1825 | 4.5 x 6.4 | 0.18 x 0.25
1812 | 4.6 x 3.0 | 0.18 x 0.125
1806 | 4.5 x 1.6 | 0.18 x 0.06
1210 | 3.2 x 2.5 | 0.125 x 0.10
1206 | 3.0 x 1.5 | 0.12 x 0.06
1008 | 2.5 x 2.0 | 0.10 x 0.08
0805 | 2.0 x 1.3 | 0.08 x 0.05
0603 | 1.5 x 0.8 | 0.06 x 0.03
Show details
Rep: 13
Posted:
Hi.
I have now destroyed my cdplayer thanks to a shortcut in my rear speakers.
How do i change the rear speakers wthout destroying anything at the back of my car?
Can someone give me a step-by-step writedown on how to do it?
Rep: 785.5k
Posted:
The package tray needs to come out in order to replace the speaker covers or speakers.
1. Remove the 3 bolts attaching the deck to the frame
2. Remove the side panels that hold down the deck so you really have to take these off. They should just snap off.
3. Remove the high mounted stop light.
4. Either remove the back seats or try to fold the back seats down and see if that gives you enough room.
5. To remove the deck you first need to go in through your trunk and you'll see 4 white clips. Push these up with some pliers, then from the inside just tug it away. Be careful shimmying the tray out, since you do not want to break it.
6. Remove old speakers. They should be held down by 3 screws.
Show details
Show details
Rep: 1
Posted:
I ordered a new battery from ifixit for my early 2011 13 inch MacBook Pro, it has been dying within 2-3 hours of use and I am wondering why.
I can't seem to put a screenshot in here, but this is what it says, charge percent is 56% and current charge is 3199 mAh full charge capacity is 5728 mAh design capacity is 6000 mAh has 6 cycle counts battery status good manufactured at 2024-03-09 temp 28.4 Celsius, discharging with 3.08 watts.
heres the screenshot
Show details
Rep: 1
Posted:
Any help for troy bilt pony
Rep: 1
Posted:
I found the problem. The red cable between solenoid and starter was broken.
Show details
Rep: 1
Posted:
Any help for troy bilt pony
Rep: 1
Posted:
I found the problem. The red cable between solenoid and starter was broken.
Show details
Rep: 265
Posted:
Panasonic LCD TV TH-L24C20D
Panasonic lcd 24 inch tv red light blinking continiuosly but the tv won't turn so please any one help me ,how do i solve this problem
Posted:
Not very good advice taking the back off a TV if your untrained.
Most red light blink as ppl say is caused though breakdown of the power unit relays. Not to be messed around by an amateur
Show details
Rep: 13
Posted:
Hi everyone
Somebody threw away this TV and I had to pick it up
As I plugged it to the socket the screen turns on black, and after a few seconds turns off in loops.
After watching a few videos I tried a few things with no success:
What can cause the problem, and how do I solve it?
I'm a biologist, so please be gentle with me š
I looked on the ribbon cable, and found out its model SFPCX495G-005 (see attached photo).
When I was looking for a replacement online, I found the exact model, yet the latter 5 digits are not the same.
Is it important?
Should I look for the exact numbers on the replacement cable?
Posted:
any success?
looks like i have the same problem
Show details
Rep: 785.5k
Posted:
@wildchild38602 let's get organized :-) First we all want to use the same terminology. Obviously you have the back cover already removed. Now take a couple of well focused, large images of your boards and the interconnect cables. Post those with your Question. That way we can see what you see and we will not all just be in the same book but also on the same page. You will need to have a multimeter so we can do some basic checks.
Since you already disconnected the main board and found out that the backlights do come on, that is a pretty good indication (no, not 100% but pretty close to it) that your power board is okay. Let us know what your definition of this "a few seconds turns off in loops" is.
Nothing wrong with being a Biologist. You are still a scientist and you got this. Thank you for picking up the TV and trying to keep it out of the landfill. Gestures like that means a lot to some of us.
Posted:
any success?
looks like i have the same problem
Oops! I'd like to change my mind.
Expand / Collapse
Pass
Up
Fail
Down
Open Help
