iPhone Parts - Page 37

Replace a stripped or missing exterior screw in the bottom edge of an iPhone 5c. Set includes two phillips or pentalobe screws.

This test cable simplifies connecting multiple lightning connector assemblies for an iPhone 5s or 5c. With this cable installed in the phone's body you can connect, test, and quickly swap multiple replacement lightning connector assemblies without

Replace the adhesive backed foam spacer on the back of the rear-facing camera cable connector compatible with the iPhone 5s or 1st generation SE. Includes a set of 5 pads.

Replace the adhesive backed foam spacer on the back of the digitizer cable connector in an iPhone 5s, 5c, or 1st generation SE. Set of 5 pads.

Replace a damaged or missing black elastic gasket that fits over the microphone on the lightning connector assembly and fixes the microphone to the rear case in an iPhone 5s.

Replace a metal bracket that holds the home button cable in the rear case compatible with the iPhone 5s. This part works with the home button cable connector bracket.

Replace the metal bracket that secures the home button assembly to the display compatible with the iPhone 5s or 1st generation iPhone SE.

Replace a bent or missing metal bracket securing the front facing camera and earpiece speaker to the display assembly in an iPhone 5s or 1st generation iPhone SE.

This test cable simplifies connecting and testing audio control and power button cables for an iPhone 5s or iPhone 5c.

Replace the power button cable connector on the logic board of an iPhone 5s. This part requires microsoldering.

This small flex cable wraps around the Left side of the Headphone Jack.

This test cable simplifies connecting and testing LCDs and digitizers for the iPhone 5s or 1st generation iPhone SE.

Replace the Bluetooth and Wi-Fi Antenna compatible with the iPhone 5s and 1st generation iPhone SE models A1453, A1533, A1662, A1723, A1724.

Replace a damaged cable or worn out internal switches for the audio control buttons and vibrate/ring switch.

Replace a 8 megapixel rear-facing camera compatible with the iPhone 5s. Part #923-0652, 821-1592-06. Fix focusing or sensor issues.

This test cable simplifies connecting and testing rear-facing cameras. Indispensable to anyone who makes multiple iPhone 5, 5s, or 1st generation SE repairs.

Replace the external lens cover for the rear-facing camera compatible with the iPhone 5.

Replace the adhesive gasket ring on the lens end of the front-facing camera of an iPhone 5, 5s, 5c, SE (1st Gen), 6, 6 Plus, 6s, or 6s Plus. Set of 5 gaskets.

Replace the small metal contact clip that fits over the plastic tab on the loudspeaker assembly of an iPhone 5.

This test cable simplifies connecting multiple front camera and sensor cable assemblies for the iPhone 5.

This test cable simplifies connecting multiple lightning connector assemblies for the iPhone 5. Connect, test, and quickly swap multiple replacement lightning connector assemblies without wearing out the delicate press fit connector on the logic

Replace a damaged or missing black elastic gasket that fits over the microphone on the lightning connector assembly and holds the microphone to the rear case of an iPhone 5.

This metal bracket secures the front facing camera and earpiece speaker to the display assembly.

This test cable simplifies connecting and testing LCD Screens and Digitizers for the iPhone 5.