iPhone X Parts - Page 2

Replace an earpiece speaker compatible with the iPhone X model #A1865, A1901, A1902. Fix problems with phone call audio.

Replace a retaining bracket behind the rear-facing cameras compatible with the iPhone X.

Replace a bent or missing pair of metal brackets for the front-facing camera assembly.

Replace a bent or missing metal bracket that supports the internal power button.

Replace a bent or missing metal bracket that supports the internal volume control buttons.

Replace the Bluetooth Antenna in the top right of the rear case compatible with the iPhone X model #A1865, A1901, A1902.

Replace a damaged or missing plastic spring clip that helps retain the SIM card tray in an iPhone X.

Replace a bent or missing front panel clip. This set of four retaining clips fit in the edges of the rear case and help hold the front panel assembly in place.

Replace a damaged or missing mount bracket supporting the external mute switch lever in your smartphone.

Replace the plastic frame for the loudspeaker opening compatible with the iPhone X. Fits between the loudspeaker and the opening at the bottom right of the rear case.

Replace the plastic camera alignment frame adhered to the inside of the front panel of your smartphone.

Replace the black shield sticker covering the back side of the logic board compatible with iPhone X.

Replace the mesh that covers the earpiece speaker opening compatible with the iPhone X model #A1865, A1901, A1902.

Replace the adhesive backed foam spacer adhered to the lower end EMI grounding bracket that presses on the vibration motor connector in an iPhone X. Set of five foam pads.

Replace the adhesive backed foam spacer for the front-facing cameras in an iPhone X. Set of five foam pads.

Replace the adhesive backed foam spacer on the rear-facing main camera assembly compatible with the iPhone X.

Replace the internal inductive charging coil compatible with the A1865, A1901, A1902 model iPhone X. Installing this part requires micro-soldering.

Replace the one large and three small adhesive backed foam spacer pads on the main part of the logic board connector bracket in an iPhone X. Set of 4 pads.

Replace the adhesive backed black graphite heat dissipation sticker on the back of the logic board connector bracket compatible with iPhone X.

Replace the conductive adhesive securing the three cables from the front-facing camera assembly. One set of three adhesive strips.

Replace the two adhesive backed black conductive foam spacers at the top of the rear case of an iPhone X. 5 pairs of pads.

Replace the adhesive backed foam gasket spacer on the loudspeaker connector in an iPhone X. Set of 5 pads.

Replace the adhesive backed foam spacer on the induction flex cable in an iPhone X. Set of 5 pads.

This test cable simplifies connecting and testing OLED displays and digitizers for the iPhone X.