Reset network config for all networks reset network android

Hello Sony Erisson W995 has a flexible cable to connect the lower and upper, if it's never been serviced, it's likely that the flexible cable is damaged Flex SE W995

Hello There is some legal issues with it. But this article will help !! Call Recorder for EMUI 9.0+ Call Recorder for EMUI 10.1

Hello You should check if your router is connected to the internet. You can do this by opening other devices in your home that are also connected to your router. If the device doesn't connect to the internet, then the problem is most likely with your router and not with your TV, if your other devices are having no connection issues, then the problem is most likely with your TV Since the connection between the router and your TV is fine, you should try resetting the network on your TV. (1) On your TV, navigate to and select Menu . (2) Select Settings , then select All Settings . (3) Select Connections . (4) Select Network , then select Reset Network . (5) You will be asked if you want to reset network settings. Select Reset . Once your network has been reset, select Network Settings to set up your connection again. If you are still having problems, a factory reset may be required. Keep in mind that this is different from resetting your network. (1) On your TV, navigate to and select Menu . (2) Select...

Hello It could be: 1) dead battery/batteries 2) driver not installed 3) usb dongle wasn't recognize properly due to glitch 4) drive for dongle wasn't installed correctly or corrupted for usb port its in 5) dongle radio burnt out 6) mouse radio burnt out 7) you forgot to put usb dongle in usb port. Try fresh batteries Try plugging the dongle in another usb port Try unistalling then reinstalling the driver Try going in device manager, see if there are unloaded drivers and either remove devices then refresh list; or update drivers.

Hello (1) Remove the Battery cover (2) Remove The Motherboard (3) Install new camera Samsung Galaxy M30 Teardown

hello Press and hold the Power button for 15-30 seconds, Or press and hold the Power key and Volume Down key simultaneously for 7-10 seconds. your phone will stay on a black screen for some seconds and come back on automatically or Remove the battery and wait for a few seconds. Reinsert the battery, press and hold the Power button, and wait for the screen to light up. If your phone doesn’t come on, the battery is inserted incorrectly. tear down Redmi 9C

1 Turn on the computer. 2 As the computer starts, press <F8> on the keyboard until the Advanced Boot Options menu appears on the screen. Note: You must press <F8> before the Windows logo appears on the screen. If you press <F8> after the Windows logo appears on the screen, the Advanced Boot Options menu will not appear on the screen. If you do not see the Advanced Boot Options menu, restart the computer, and then repeat this step until you see the menu on the screen. 3 Press the <Down Arrow> on the keyboard to select Repair Your Computer on the Advanced Boot Options menu, and then press <Enter>. 4 Specify the language settings that you want, and then click Next. 5 Log in as a user who has administrative credentials, and then click OK. 6 Click Dell Factory Image Restore. 7 In the Dell Factory Image Restore window, click Next. 8 Click to select the Yes, reformat hard drive and restore system software to factory condition check box. 9 Click Next. The computer is restored to the default factory configuration....

Hello Take a look at the steps needed to find a short circuit with a multimeter Check inside the charging port for any obvious unsafe conditions, such as short circuit betwen positive and negative connector. You have to touch the black probe multimeter to the negative and the red probe to the positive chargir port. if you are seeing a value of 1 or OL, then there is a short circuit in your electrical circuit. clean your solder with a solder wick and do the test again with a multimeter, is it still short or not if you seing a certain resistance value other than OL, means your charging port has no problem, the problem is other part on motherboard Send it to a professional to get service handling assistance. good luck

replace the keyboard bro