Fix Your Stuff Community Store

Nintendo's first 3DS handheld device released February 2011, identified by model number CTR-001.

461 Questions View all

Options

3DS slider on PCB broke off

Block Image

After replacing the speaker cable of my 3ds and reassembling the console, I broke off this plastic piece off the 3D slider.

The 'internal' slider is still there, so using a small tool like a toothpick, I can slide it (with the top shell detached).

Since it's a real small, thin piece of plastic, I'm wondering if I can super glue something to it to make the slider work. It's such a hassle to replace the entire speaker cable just for this small piece.

Anyone's got an idea of how to fix this (easily)?

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

Hi Elise!

Hmm, I would glue something to it which is just as long as the plastic piece. I think this is the most easiest way to get it on there. Not sure what else you can do instead of replacing it.

Was this answer helpful?

Yes No
Score 1

2 Comments:

Yeah thats what I thought. Do you think super glue would work?

Also, do you know if this can be soldered? I found a replacement piece so I dont have to replace the entire ribbon cable

by

Yeah super glue works. But be very careful with this! Yeah, soldering will also work! But again, be careful with this as well, it’s really fragile. If the glue doesn’t work, try to solder a new one in! Good luck!!

by

Add a comment

Add your answer

Elise will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 13

All Time: 13