Intro History: Rollei 6000/6008 Battery LiFePO4 Replacement
| Device |
|
|
| Type |
|
|
| Thing |
|
|
| Title |
|
|
| Introduction |
|
|
| Time Required Min |
40 minutes
|
|
| Time Required Max |
2 hours
|
|
| Imageid |
Before
After
|
|
| Objectid |
Before After |
|
| Difficulty |
Moderate
|
|
| Conclusion |
|
|
| Author | ||
| Public |
No
|
Tools
- Soldering Iron x1 added.
- Lead-Free Solder x1 added.
- Scissors x1 added.
- Phillips #0 Screwdriver x1 added.
- Slip Joint Pliers x1 added.
- Flush Cutter x1 added.
- File Set x1 added.
- Sand Paper x1 added.
- Multimeter x1 added.
Parts
- 14500 LiFePO4 Battery Soshine N4 700mAh LiFePO4 x3 high constant power output (I had success with batteries having a continuous discharge:10C and pulse: 20C) added.
- 8A 9.6V PCB BMS Protection Board for 3 Packs 18650 LiFePO4 LiFe Battery Cell 3S T-5016A15 x1 I picked the one with highest current I could find, since the Rollei has a high draw if switched on. added.
- Nickel-plated Hilumin metal strips x1 added.
- Electrical Tape in 6 Assorted Colors x1 added.
- Thin Electrical Wire x1 added.
- Foam x1 added.
- Glue Gun x1 added.
Flags
- DANGER added.
- In Progress added.
- Community-Contributed Guide added.
Steps
Step #: 1
Before
After
Step #: 2
Before
After
Step #: 3
Before
After
Step #: 4
Before
After
Step #: 5
Before
After
Step #: 6
Before
After
Step #: 7
Before
After
Step #: 8
Before
After
Step #: 9
Before
After
Step #: 10
Before
After
Step #: 11
Before
After
Step #: 12
Before
After
Step #: 13
Before
After
Step #: 14
Before
After
Step #: 15
Before
After
Step #: 16
Before
After
Step #: 17
Before
After
Step #: 18
Before
After
Step #: 19
Before
After
Step #: 20
Before
After
Step #: 21
Before
After
Step #: 22
Before
After
Step #: 23
Before
After
Step #: 24
Before
After
Step #: 25
Before
After
Step #: 26
Before
After
Step #: 27
Before
After
Step #: 28
Before
After
Step #: 29
Before
After
