Hook the idler pulley on the motor mount before sliding the drum into the cabinet using the belt.

Align the rear drum bearing into its socket and confirm no obstructions by rotating the drum.

Attach the belt onto the motor pulley and release the idler pulley to restore tension.

Hang the front door panel on the lower chassis fingers and reconnect any door harness wiring.

Tighten all front and rear chassis screws to secure the door and top panel in place.

Reconnect the console by aligning its tabs and reinstall any screws that hold it together.

Plug in the dryer and run it briefly to verify proper drum rotation and heating performance.