This user hasn't filled out their profile yet.
My Guides
Guides I've Contributed To
Page 1 of 2
My Wikis
Wikis I've Contributed To
My Favorite Guides
Completed Guides
Questions
Guide Comments
Page 1 of 4
lkmemphis
@lkmemphis
Teams
Votes
19
0
Get quick access to guides, parts and answers for your devices
This user hasn't filled out their profile yet.
Page 1 of 2
Why is this seventh screw separate from the other six in the prior step?
Okay, I see the seventh screw is addressed in the next step, #4. Shouldn’t the image in Step 3 show just the six screws the instructions is referring to>
There are 7 red highlight circles showing on the image.
In the second step the photo looks like the laptop is still in the same position as the first step, which means, according to the first image, the second image shows someone removing the four screws at the top of the laptop. To be accurate to the text in Step 2, the barcode would appear at the top of the image.
Mick: Did you have to run the blue tool around the edge? Or do corners? The first picture is at the upper righthand corner and the second pic is at the lower righthand corner. This suggests some kind of movement. Could you explain (briefly)?
In my older version, the clip is gray and at the base of the vacuum floor brush. It removes the same way, though.
The major image for cleaning the fan should have been a bit more of a longshot so that the canned air can (or enough of it) clearly shows. Then Step 4 is fine as a close up now that the fixer knows what that red tube is connected to.
Will this reference to where the power adapter was be meaningful? Forgive me, but this is like directions that say “turn left at where the A&W used to be”
Is that green panel turned upside down in the second image?
Is that brownish thing the fuse?
Does this show the cable removed or not removed? Is it the set of wires encased in blue? Or is it the larger white thingie o the right of the elevated motherboard?
How many cables? Can you mark them?
Page 1 of 4
@lkmemphis
19
0